When using the car on track it is impossible to setup proper rear aliment with OEM arms. The more stress you put on the OEM arms the more the rubber on arm compresses and you loose what was very precisely set during car alignment.For that reason we have come up with rear adjustable rear toe links (adjustable track rods) that do not utilize rubber at all. Our arms use metal to metal uniball just like used in Porsche RS line (GT2RS, GT3RS). Tested intensively on the track on our Audi TTRS. Now it is possibile to easily setup and maintain desired camber on your track car.Product functionalities:– no rubber to bend, you will not loose the geometry set when doing aliment– precise toe adjustmentFeatures:– T45 metal lightweight piping painted black– 4 x M16 uniballs, (Motorsport HEAVY DUTY series from RODOBAL [Italy] with reinforced PTFE anti-friction liner, preloaded tight fit, have forged body, out of 42CrMo4 heat treated steel, for maximum load capacity. The inner ring is out of 100Cr6 carbon steel, hardened, ground and chrome plated.)– metal bushings galvanized in blackWhat is included:– pair of rear preassembled adjustable track rods with 12 mm sleeves for MQB or 14 mm sleeves for PQ35– 4 rubber ends to protect uniballs– eccentric lockout plates (two positions – 4 pcs central and 4 pcs +5 mm setting)– printed install instructionsMax safe length – 310 mm (12.204 inches)Min length – 302 mm (11.889 inches)Used in cars (type numbers in brackets):2022 – Audi A3/S3/RS3 (8Y)2005 – 2013 Audi A3/S3/RS3 (8P)2015 – 2021 Audi A3/S3/RS3 (8V/8V.5)2007 – 2013 Audi TT/TTS/TTRS (8J)2015 – 2021 Audi TT/TTS/TTRS (8S)2007 – 2009 Volkswagen Eos (MkV)2010 – 2013 Volkswagen Eos (MkVI)2006 – 2009 Volkswagen Jetta/GTI/GLI/R32 (MkV)2010 – 2014 Volkswagen Golf/GTI//R (MkVI)2015 – 2020 Volkswagen Golf/GTI/R (Mk7)2020 – Now Volkswagen Golf/GTI/R (Mk8)2006 – 2013 Volkswagen Passat2008 – 2013 Volkwagen Tiguan2010 – 2015 Volkswagen Jetta/GLI (MkVI)Replaces:– 5Q0501529C / 5Q0 501 529C– 1K0501529J / 1K0 501 529JNote: Installation of this rear trailing arm kit will introduce some additional some NVH (noise, vibration, and harshness) transfer into the cabin.
When using the car on the track the cornering forces are bending the rubber in the wishbones (control arms). Thus changing the desired geometry of the car that was set on alignment rack. This can lead to slower track times and bad tire usage.For that reason we have come up with our control arms. Our race wishbones use metal to metal uniball just like used in Porsche RS line (GT2RS, GT3RS). Tested intensively on our Track Audi TTRS.We are using same T45 tubing as in WRC cars, our wishbones provide increased stiffness and extra adjustment. All factory parts bolt up to this unit, no other modifications are necessary.Product functionalities:– Adjustment both caster and camber (up to -4.5 degrees in camber)– no rubber to bend, you will not loose the geometry set when doing aliment– works with OEM subframe and our tubular subframes– enables removal of the wishbones with our the need for removal of the subframeFeatures:– T45 (BS4T45 to BS4T100) tubing– proven motorsport M18 uniballs (Motorsport HEAVY DUTY series from RODOBAL [Italy] with reinforced PTFE anti-friction liner, preloaded tight fit, have forged body, out of 42CrMo4 heat treated steel, for maximum load capacity. The inner ring is out of 100Cr6 carbon steel, hardened, ground and chrome plated.)– plug and play to use with the car inc xenon sensors– possibility to add Audi 8V air ducts to the wishbones (air ducts are not included)What is included:– two (pair for one car) front wishbones with all hardware for install– four rubber dust caps for uniball protection– printed install instructionsUsed in cars (type numbers in brackets):2012 – Audi A3/S3/RS3 (8Y, 8V and 8VFL MQB)2015 and up – Audi TT/TTS/TTRS (8S)2012 – Volkswagen Golf/GTI/R (Mk7 MQB Mk8)2012 – Seat Leon (5F MQB)Other MQB-based modelsT45 is a very unique seamless carbon based steel tube that has been used in many applications in different industries. It is stronger than Co-Mo 4130 tubing that also used in motorsport. It is widely used in the aerospace sector in equipment such as pilot’s seats and crew’s seats due to the materials ability to withstand high G forces without snapping or splitting. This material is a Carbon Manganese based and conforms to the full Aerospace Specification laid down by British Standards.PropertiesTensile: 700 – 900MPa,0.2% Yield 620MPa minimumHardness Test: 201min – 262 max HB or 210min – 275max HV.Note: Sold for off road, track and racing applications only. Installation of this rear arm kit might introduce some additional some NVH (noise, vibration, and harshness) transfer into the cabin.Note 2: Brake disc clearance is reduced by about 2[mm] in relation to OEM wishbones – keep this in mind, if You’re going to use aftermarket brakes with reduced clearance.Replaces:– 5Q0407151 and 5Q0407152– 81A407151C and 81A407152C– 8S0407151D 8J0407365 or 8J0407366
When using the car on the track the cornering forces are bending the rubber in the wishbones (control arms). Thus changing the desired geometry of the car. This can lead to slower track times and ineffective tire usage.For that reason we have come up with our control arms. Our race wishbones use metal to metal uniball just like used in Porsche RS line (GT2RS, GT3RS). Tested intensively on our Track Audi TTRS.We are using same T45 tubing as in WRC cars, our wishbones provide increased stiffness and extra adjustment. All factory parts bolt up to this unit, no other modifications are necessary.Most of the cars used on track are lowered compared to stock. Lowering the car has the undesirable effect of moving the chassis lower than the ball joint and excessive lowering results in the situation where the wishbone is pointing upwards at the wheel end. This means you need more steering lock when cornering, the car is sluggish to respond and doesn’t feel as communicative. This is where our wishbones comes to fix this offering modified kinematics option to compensate lowered ride height. This version can only be used with our front tubular subframes.This means you need more steering lock when cornering, the car is sluggish to respond and doesn’t feel as communicative. To correct this and achieve the best kinematics of front suspension, you should use the sleeves included in the kit. They change the way kinematics of the suspension works, changing the position of the turnover centers of the components. More pictures with additional information at the bottom.Product functionalities:– Adjustment both caster and camber (up to -4.5 degrees camber)– no rubber to bend, you will not loose the geometry set when doing aliment– works with OEM subframe and our tubular subframes– enables removal of the wishbones with our the need for removal of the subframeFeatures:– T45 (BS4T45 to BS4T100) tubing– proven motorsport M18 uniballs (Motorsport HEAVY DUTY series from RODOBAL [Italy] with reinforced PTFE anti-friction liner, preloaded tight fit, have forged body, out of 42CrMo4 heat treated steel, for maximum load capacity. The inner ring is out of 100Cr6 carbon steel, hardened, ground and chrome plated.)– plug and play to use with the car inc xenon sensors– possibility to add Audi 8V air ducts to the wishbones (air ducts are not included)What is included:– two (pair for one car) front wishbones with all hardware for install– set of spacers to reposition the steering rack and front anit-roll bar. Both moved up. See picture bellow.– four rubber dust caps for uniball protection– printed install instructionsUsed in cars (type numbers in brackets):2022 – Audi A3/S3/RS3 (8Y)2013 – 2021 Audi A3/S3/RS3 (8V and 8VFL MQB)2014 – 2021 Audi TT/TTS/TTRS (8S)2012 – Volkswagen Golf/GTI/R (Mk7 MQB Mk8)2012 – Seat Leon (5F MQB)Other MQB-based carsT45 is a very unique seamless carbon based steel tube that has been used in many applications in different industries. It is stronger than Co-Mo 4130 tubing that also used in motorsport. It is widely used in the aerospace sector in equipment such as pilot’s seats and crew’s seats due to the materials ability to withstand high G forces without snapping or splitting. This material is a Carbon Manganese based and conforms to the full Aerospace Specification laid down by British Standards.PropertiesTensile: 700 – 900MPa,0.2% Yield 620MPa minimumHardness Test: 201min – 262 max HB or 210min – 275max HV.Note: Sold only for off road, race track and racing applications. If the buyer wants to use the parts elsewhere it is up to them to arrange appropriate documents. Lowered wishbones can be used only together with our tubular subframe.Note 2: When using sleeves to put steering rack higher it might be not possible to use downpipe size over 3 inch. All depends on the car and downpipe design. We have tested many 3 inch downpipe designs and they work.Additional information – benefit of using our lowered version of the wishbones.One of the first things to do in improving stock car cornering performance is lowering its center of gravity, by decreasing its ride height. Unfortunately, it also changes negatively original suspension geometry and kinematics. To prevent it, our wishbones and subframe combo provides modified suspension mounting points, which corrects bump steer and roll center for better car handling and responsiveness. Besides correction of roll center height, it also helps with camber gain (change of camber angle within suspension travel). In circuit racing, priority is to optimize it, to reduce positive camber in corners for better grip and that is what our additional mounting provides.To address this issue with the come up with our wishbones subframe set.The front mount of the wishbone is lowered on the subframe mount. Lower mount hole is standard height, higher mount hole is to be used with our lowered wishbones. Please follow install instructions for the parts installation.Note : Brake disc clearance is reduced by about 2[mm] in relation to OEM wishbones – keep this in mind, if You’re going to use aftermarket brakes with reduced clearance.Replaces:– 5Q0407151 and 5Q0407152– 81A407151C and 81A407152C– 8S0407151D 8J0407365 or 8J0407366– 8S0 407 151 B (left/right)– 8S0 407 151 D (left/right)
Here are our new Bump Steer Front Adjustable Tie Rod Ends for RS3 [8P], A3/S3 [8V], A3/S3 [8P], Leon 5F, Leon 1P, Skoda, Golf 5, Golf 6, Golf 7 FWD, Golf 7 AWD, Scirocco (PQ35 and MQB but with out Audi RS3 8V for this car please use WAS-513 here.For performance driving toe angle is one of the most important suspension setup parameters. To control it over the entire range of coil over travel, we need to measure and adjust bump steer which could be needed, especially when we have changed other suspension parameters like ride height.With Verkline tie rod ends it is possible to adjust front bump steer by relocating the ball joint lower or higher with attached adjustment spacers (see picture below). There are 6mm of them combined and You should always use all of them. To replicate OEM geometry put 2 mm of adjustment spacers below the ball joint and 4mm above it. If You want to change Your bump steer simply relocate some of the adjustment spacers from below the ball joint to its top, or the other way around.Product functionalities:Stiffer and stronger than OEM – designed to withstand all track racing abuse. Gives the possibility of adjusting the front bump steer.Uses spherical bearings which give direct and predictable steering response.Features:Precisely CNC machined out of aluminum and high strength steel.Black coating for a nice look and corrosion resistance.Compatible both with OEM and Verkline uprights.What is included:Two aluminum tie rod ends (left and right – set for one car).Set of bolts.Two high strength pins.Set of spacers for adjusting.Two high quality PTFE motorsport uniballs.Two turnbuckles with super slim nuts.Printed install instructions.Used in cars (type numbers in brackets):2005 – 2013 Audi A3/S3/RS3 (8P)2015 – 2021 Audi A3/S3 (8V/8V.5) – Does not work with RS3 (8V). Please order WAS-513 here.2007 – 2009 Volkswagen Eos (MkV)2010 – 2013 Volkswagen Eos (MkVI)2006 – 2009 Volkswagen Jetta/GTI/GLI/Rabbit/R32 (MkV)2010 – 2014 Volkswagen Golf/GTI/Rabbit/R (MkVI)2015 – 2020 Volkswagen Golf/GTI/R (Mk7)2010 – 2015 Volkswagen Jetta/GLI (MkVI)Note: Installation of this rear insert kit will introduce some additional NVH (noise, vibration, and harshness) transfer into the cabin.
After long CAD development based on 3D scan of OEM subframe, tested with CAD FEA (Finite element method) and road going tests you can now buy brand subframe for front of your Audi/VW/SEAT/Skoda cars based on MQB platform. List of cars bellow.Using same T45 tubing as in WRC cars, our subframes provide increased stiffness and mass reduction. All factory parts bolt up to this unit, no other modifications are necessary.Benefits:– 6.5 kg (13 lbs), it is 3.5 kg (8.8 lbs) saving over OEM aluminium subframe or 6 kg over OEM steel. It is 50% savings from steel version !– second, higher set of control arms mounts to correct suspension kinematics to be used with our tubular wishbones– no need to use rear steel oem subframe support. Additional 0,5 kg savings.– one mounting subframe position, eliminates subframe shifting under the car. No need for subframe locking kit / deadset collar kit (weight savings).– increases chassis rigidity for improved handling performance. No need for additional lower bar/member brace (weight savings)– polyurethane dogbone mount, significantly reduces engine pitching back and forwards essential for performance driving, no need for additional dog bone insert or aftermarket mount.Features:– better access to car under body and enables wishbones change with out subframe removal– T45 (BS4T45 to BS4T100) tubing imported from UK and S355 metal sheets– all components TIG welded– delivered painted (powder coated) black or on special order ( 50 euro) any RAL color– can be used with OEM wishbones or our tubular wishbones– mounts to the OEM car body and no other modifications are needed to fit the subframe– includes two xenon lights mounts– can be used with OEM undertray– can be used with OEM or aftermarket dogbone support (arms) What is included:– front subframe painted with red polyurethane dogbone mount (black available as a option, it is stiffer and recommended only for race cars and motorsport use as there is more NVH present)– Printed install instructionsUsed in MQB platform cars (Type numbers in brackets):Audi A1 Mk2 (2018 )Audi A3/S3 Mk2 (8Y, 8V & 8VFL 2012 )Audi RS3 (8Y, 8V & 8FV 2013 )Audi TT/TTS (8S 2014-2021)Audi TTRS (8S 2016-2021)Audi Q2 (2017 )Audi Q3 / RSQ3 (F3 2018 )SEAT León Mk3 (5F) (2006-2013)SEAT Ibiza Mk5 (2017 )Skoda Octavia Mk3Skoda Superb B8VW Golf Mk7 Mk8 (2012 ) Gti / RVW Passat Mk8 (2015 )VW Polo Mk6 (2018 )Full list of cars available here https://en.wikipedia.org/wiki/Volkswagen_Group_MQB_platform#ModelsSubframe is made for both LHD and RHD cars.T45 is a very unique seamless carbon based steel tube that has been used in many applications in different industries. It is stronger than Co-Mo 4130 tubing that also used in motorsport. It is widely used in the aerospace sector in equipment such as pilot’s seats and crew’s seats due to the materials ability to withstand high G forces without snapping or splitting. This material is a Carbon Manganese based and conforms to the full Aerospace Specification laid down by British Standards.PropertiesTensile: 700 – 900MPa,0.2% Yield 620MPa minimumHardness Test: 201min – 262 max HB or 210min – 275max HV.Replaces:– 5Q0199313N– 5Q0199315P– 5Q0199315R– 5Q0199369G– 3Q0199369ENotice: Sold for off road, track and racing applications only. Installation of this product will introduce some additional NVH (noise, vibration, and harshness) transfer into the cabin. We strongly advice to mount the subframe in professional lift shop or mechanic.Notice 2: If you are using standard OEM metal wishbones and your car is lowered significantly it might be necessary to shim off around 2 mm of the wishbones at on the length of 10 mm. It is not necessary to shim anything with OEM aluminium wishbones or when using Verkline Front Lower Control Arms.Notice 3: Subframe does not work with Whiteline and SuperPro Front Lower Control Arms. They are bigger in width then OEM arms and can’t be used with our subframe.
BUNDLE INCLUDES:Front Lightweight Tubular Subframe MQB - Audi TTRS TTS TT 8S RS3 S3 A3 8V Golf Mk7€1.399,00 Original price was: €1.399,00.€1.259,10Current price is: €1.259,10.Available on backorderAdjustable tubular front race wishbones with modified kinematics MQB Audi RS3 S3 A3 8V Golf Mk7 Seat Leon 5F€1.199,00 Original price was: €1.199,00.€1.079,10Current price is: €1.079,10.Available on backorderRear Lightweight Tubular Subframe for FWD cars - VAG A3 TT Golf Mk5 Mk6 Mk7 Sirocco Seat Leon€1.095,00 Original price was: €1.095,00.€985,50Current price is: €985,50.In stockSpherical adjustable MQB Rear Trailing Arm Kit Audi RS3 S3 A3 8V Golf Mk7 Seat Leon 5F€1.199,00 Original price was: €1.199,00.€1.079,10Current price is: €1.079,10.Available on backorderRear fully adjustable control arms uniball Audi TT TTS TTRS 8J 8S RS3 S3 A3 8P 8V 8VFL Golf Mk5 Mk6 Mk7 Scirocco€549,00 Original price was: €549,00.€494,10Current price is: €494,10.Available on backorderAdjustable rear toe links metal rod ends Audi TT TTS TTRS 8J 8S RS3 S3 A3 8P 8V 8FL Golf Mk5 Mk6 Mk7 Scirocco€549,00 Original price was: €549,00.€494,10Current price is: €494,10.Available on backorderRear spring sitting wishbone and wheel bearing housing inserts FWD MQB Audi A3 8V Golf Mk7 Seat Leon 5F€273,90 Original price was: €273,90.€246,51Current price is: €246,51.In stock
MQB (Audi TT, A3, VW Golf 7, 8) full suspension kit.The kit consists of (you can click bellow on the name of the item to view detail product description):– Front Light Weight Tubular Subframe.– Rear Light weight Tubular Subframe.– Adjustable tubular front race wishbones with modified kinematics.– Spherical adjustable MQB Rear Trailing Arm Kit.– Rear fully adjustable control arms uniball.– Adjustable rear toe links metal rod ends.– Rear spring sitting wishbone and wheel bearing housing inserts.Rear adjustable anti-roll bar links are not included. You can find them here and add to your order.Technical details– Mountings to the chassis using are on standard attachment points.– Full 3D CAD designed.– FEA Tested and additional reinforcement to the original design was made.– Manufactured fully from T45 tubing and S355 steel to the ultimate strength.– Tig Welded.– Motorsport quality Rod EndsUsed in MQB platform cars (Type numbers in brackets):Audi A3 Mk2 (8V & 8VFL 2012+)Audi TT (8S 2014+)Seat Leon 5FVW Golf Mk7 Mk8 (2012+)Notice: Sold for off road, track and racing applications only. Installation of this product will introduce some additional NVH (noise, vibration, and harshness) transfer into the cabin. We strongly advice to mount the subframe in qualified and experienced workshop that would know what are doing.
BUNDLE INCLUDES:Adjustable tubular front race wishbones MQB Audi RS3 S3 A3 8V Golf Mk7 Seat Leon 5F€1.099,00 Original price was: €1.099,00.€1.044,05Current price is: €1.044,05.Available on backorderSpherical adjustable MQB Rear Trailing Arm Kit Audi RS3 S3 A3 8V Golf Mk7 Seat Leon 5F€1.199,00 Original price was: €1.199,00.€1.139,05Current price is: €1.139,05.Available on backorderRear fully adjustable control arms uniball Audi TT TTS TTRS 8J 8S RS3 S3 A3 8P 8V 8VFL Golf Mk5 Mk6 Mk7 Scirocco€549,00 Original price was: €549,00.€521,55Current price is: €521,55.Available on backorderAdjustable rear toe links metal rod ends Audi TT TTS TTRS 8J 8S RS3 S3 A3 8P 8V 8FL Golf Mk5 Mk6 Mk7 Scirocco€549,00 Original price was: €549,00.€521,55Current price is: €521,55.Available on backorderRear spring sitting wishbone and wheel bearing housing inserts FWD MQB Audi A3 8V Golf Mk7 Seat Leon 5F€273,90 Original price was: €273,90.€260,21Current price is: €260,21.In stockDescription More InformationThis full wishbone bundle is 5% off compared to standard price if items bought separately.Wishbone kit consists of (you can click bellow on the name of the item to view detail product description):– Front Adjustable tubular race wishbones– Spherical adjustable rear trailing arms– Rear fully adjustable control arms uniball– Adjustable rear toe links metal rod ends– Rear spring sitting wishbone and wheel bearing housing insertsUsed in MQB platform cars (Type numbers in brackets):– Audi A3 Mk2 (8V & 8VFL 2012+)– Audi TT (8S 2014+)– Seat Leon 5F– VW Golf Mk7 Mk8 (2012+)Note: Sold for off road, track and racing applications only. Installation of this rear arm kit might introduce some additional some NVH (noise, vibration, and harshness) transfer into the cabin.
When using the car on track it is impossible to setup proper rear camber with OEM arms. The more stress you put on the OEM arms the more the rubber on arm compresses and you loose what was very precisely set during car alignment. Now it is possibile to easily setup and maintain desired camber on your track car.For that reason we have come up with rear adjustable control arms that use metal to metal uniball and spherical joints just like used in Porsche RS line (GT2RS, GT3RS). Tested intensively on our Track TTRS.Product functionalities:– adjustment of the wishbone angle done without removal of the wishbone from the car. Most of the other products require removal of the wishbone for adjustment. It is very time consuming drudging setup of the car in a workshop during wheel alignment– possibility of pushing up to -4 negative camber for maximum track abuse– no rubber to bend, you will not loose the geometry set when doing wheel aliment– lockout polyurethane plates to block wishbone movement on OEM subframeFeatures:– CNC machined form 7075 aluminium and anodized in black– M16 left hand rod end and M16 uniball (Motorsport HEAVY DUTY series from RODOBAL [Italy] with reinforced PTFE anti-friction liner, preloaded tight fit, have forged body, out of 42CrMo4 heat treated steel, for maximum load capacity. The inner ring is out of 100Cr6 carbon steel, hardened, ground and chrome plated.)– M24 rotating clamp for easy adjustment during wheel alignment– metal bushings galvanized in black– fixing for the brake hose– polyurethane pads for correct control arms positioning– rubber ends to protect M16 rod ends– eccentric lockout plates (two positions – 4 pcs central and 4 pcs +5 mm setting)What is included:– pair of rear adjustable control arms– 2 pcs of rose joint rubber dust protection sealing boots– 8 pcs of eccentric lockout washers– printed install instructionsUsed in cars (type numbers in brackets):2022 – Now Audi A3/S3/RS3 (8Y)2005 – 2013 Audi A3/S3/RS3 (8P)2015 – 2021 Audi A3/S3/RS3 (8V/8V.5)2007 – 2013 Audi TT/TTS/TTRS (8J)2015 – Now Audi TT/TTS/TTRS (8S)2007 – 2009 Volkswagen Eos (MkV)2010 – 2013 Volkswagen Eos (MkVI)2006 – 2009 Volkswagen Jetta/GTI/GLI/Rabbit/R32 (MkV)2010 – 2014 Volkswagen Golf/GTI/Rabbit/R (MkVI)2015 – 2020 Volkswagen Golf/GTI/R (Mk7)2020 – Now Volkswagen Golf/GTI/R (Mk8)2006 – 2013 Volkswagen Passat2008 – 2013 Volkwagen Tiguan2010 – 2015 Volkswagen Jetta/GLI (MkVI) Replaces:– 1K0505323N / 1K0 505 323N– 5Q0505323C / 5Q0 505 323C
When using the car on track it is impossible to setup proper rear camber with OEM arms. The more stress you put on the OEM arms the more the rubber on arm compresses and you loose what was very precisely set during car alignment. Now it is possibile to easily setup and maintain desired camber on your track car.For that reason we have come up with inserts for wheel bearing housing and rear lower wishbone that the spring sits on. Our inserts use metal to metal uniball just like used in Porsche RS line (GT2RS, GT3RS). Tested intensively on our Track TTRS.Product functionalities:– no rubber to bend, you will not loose the geometry while cornering that was set when doing alimentFeatures:– CNC machined form 7075 aluminium and anodized in black and silver– M18 and M16 uniball– metal bushings galvanized in blackWhat is included:– four inserts (this is a kit for one car)– printed install instructionsNot for AWD cars with aluminium rear wheel bearing housing. For this use ELA-062Used in cars (type numbers in brackets):2013 Audi A3 (8V & 8VFL MQB)2013 Volkswagen Golf/GTI (Mk7 MQB Mk8)2012 Seat Leon (5F MQB)Replaces:– 1K0505553A / 1K0 505 553A – uprights bush– 5Q0505553 / 5Q0 505 553 – inner bushNote: Installation of this rear insert kit will introduce some additional some NVH (noise, vibration, and harshness) transfer into the cabin.
When using the car on the track rear sway bar / anti-roll bar plays important role in cars handling. It is connected to the wishbones by sway bar links / anti-roll bar links. Those factory links tend to get loose and sloppy thus limiting the work of the sway bar. Even if new they have some plastic parts in them that bends then the force is applied making the anti-roll bars end links response slower.For that reason we have come up with rear anti-roll bar links kit. Our rear end links kit use metal to metal uniball to eliminate delay in sway bar/anti-roll bar response in the corner. Because they are adjustable in length it is also possible to adjust them for cross weight car setup.Product functionalities:– no rubber or plastic parts to bend, you get faster sway bar / anti-roll bar reaction– adjustable in length -> possibility for cars cross weight setup adjustmentFeatures:– CNC machined form 7075 aluminium and anodized in black– M12x1.25 race rod-ends proven to work on our Lancer EVO race kits. Not China made.– M12 Fluro uniball– metal bushings galvanized in black– 10.9 grade bolts– rubber rod endsWhat is included:– pair of rear anti-roll bar linksUsed in cars (type numbers in brackets):– 2013 – Audi A3/S3/RS3 (8Y/8V/8V.5 – MQB)– 2014 – Audi TT/TTS/TTRS (8S – MBQ)– 2010 – 2014 Volkswagen Golf/GTI/R (Mk7 – MQB Mk8)Replaces:– 5Q0505465C / 5Q0 505 465C
Anti-squat suspensions are used to reduce body squat by altering the rear suspension so that the forces resulting from accelerating pass through the control arms and suspension linkage rather than through the coilovers or struts.In MQB, rear suspension we can define our anti-squat by inclination of a line which connects the wheel center and chassis mounting point of the trailing arm. Most of the cars are lowered with aftermarket suspension components. In the picture below the car is lowered and OEM wishbone (and our 0 setup) in MQB car has anti-squat line pointing down (red line), it means that the car has negative anti-squat value. It causes excessive suspension displacement under acceleration and reduces responsiveness.Here is helpful video about ani-squat -> Anti-Squat Suspension Geometry – ExplainedTo correct this we have come up with an adjustable rear trailing arm. When the wishbone in the car is used in 20 setup anti-squat value (green line) is corrected and it is back to factory settings.If the car wishbone is used in 40 setup anti-squat value (blue line). It makes suspension move even less, thus resulting in faster response of the car from stand still or when exiting the corner. Also when there is less suspension movement camber and toe are less affected (better predictability of the car).With the increase of anti-squat You also get higher values of rear anti-lift. It keeps Your rear suspension low under braking, which increases grip and car predictability. This allows You to brake later and go into a corner with higher speed and confidence.Product functionalities:– 3 position anti-squat and anti-lift adjustability (0, 20, 40)– OEM wishbone bends during normal operation and this increases when the car is lowered or camber/toe is increased. Our CNC billet wishbone has spherical bearings to avoid that and it is also big increase of stiffness results in better handling in corner exit and under acceleration.– High quality, metal spherical bearings instead of rubber bushings, so You will not lose the geometry set when doing alignment.– Same weight as OEM regarding additional functionalityFeatures:– This is a bolt-in kit, no modifications necessary to the car.– Wishbone comes pre assembled.– CNC machined arm out of billet aluminum.– TIG welded high strength steel mountings.– parking brake line brackets– Includes all necessary parts to mount on the car.What is included:– two aluminium wishbones anodized in black with spherical bearings– two steel adjustment chassis mounting bracket in black– two steel adjustment trailing arm steel bearing carrier in black– bolts– printed install instructionsUsed in cars (type numbers in brackets):2021 – Now Audi A3/S3/RS3 (8Y)2012 – 2020 Audi A3/S3/RS3 (8V)2012 – 2021 Audi TT/TTS/TTRS (8S)2012 – 2020 Volkswagen Golf/GTI/R (Mk7 Mk8)2012 – 2020 Seat Leon (5F)Replaces:– 5Q0 505 223 D / 5Q0505223D– 5Q0 505 224 D / 5Q0505224DNote: Sold for off road, track and racing applications only. Installation of this rear trailing arm kit will introduce some additional some NVH (noise, vibration, and harshness) transfer into the cabin.
1.199,00 €*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...